The short answer
Xactimate certification is a set of three exams sold only by Verisk, the software’s maker: Level 1 Fundamentals, Level 2 Proficiency and Level 3 Mastery, each a prerequisite for the next. Each exam costs $120 according to the Xactware store, must be taken within 12 months of purchase, needs a 70 percent pass on two timed sections, and stays valid for 2 years.
Key takeaways
- All three exams cost $360 together, per the Xactware store price of $120 each.
- Exam time runs about 120 to 300 minutes for Level 1 and up to 420 for Level 3, by Verisk’s own estimates.
- Routes to a Level 1 and 2 certificate run $302 to $1,139, according to the published prices compared below.
- No law requires it; buyers write it into postings and contracts, often without a level.
Level 1, 2 or 3: what does each Verisk exam actually test?
All three follow one format, set out in the Verisk Xactimate User Certification guide (copyright 2023). You build an estimate from a sketch and scope scenario in your own copy of Xactimate, which must be the most recent version, then answer 30 practical questions about that estimate’s scope, quantities, dimensions and pricing, then 30 multiple-choice, true/false and matching knowledge questions. Each timed section needs 70 percent.
| Level | What Verisk says it verifies | Prerequisite | Exam time, summed | Published price |
|---|---|---|---|---|
| Level 1, Fundamentals | Create an estimate start to finish: claim info, sketch, roof types, line items, printing reports | None | 120 to 300 minutes | $120 exam; $62 Levels 1 and 2 workbook |
| Level 2, Proficiency | Power-user work: depreciation options, macros, waste multipliers like SQ*1.15, multiple levels, data transfer | Level 1 | 120 to 300 minutes | $120 exam; same $62 workbook |
| Level 3, Mastery | Subject matter expert: labor burdens, market conditions, multi-level sketches, decks, fences, report scenarios | Level 2 | 180 to 420 minutes | $120 exam; $25 Level 3 workbook |
The objective lists show where each level stops. Level 1 covers the steps needed to finish and print an estimate, including XactAnalysis assignments and the 4-step estimating process. Level 2 adds the depreciation options and coverage settings that feed claim totals, plus macros and global changes. Level 3 is the gate to teaching: the Verisk trainer certification guide lists passing the Level 3 exam as step 3 of becoming an Xactimate Certified Trainer.
What the levels do not test is restoration judgement. Choosing between line items for a Category 3 water loss is scope, and the software exam only checks that you can enter a given scope correctly. Price list selection and line item anatomy are covered in how Xactimate pricing works.
How long is each Xactimate certification exam? 120 to 420 minutes by Verisk’s estimates
Per the Verisk certification guide, the Sketch and Scope lab takes about 60 to 120 minutes at Levels 1 and 2 and 120 to 240 minutes at Level 3, and you may leave and return before starting the questions. The practical and knowledge sections each take about 30 to 90 minutes and are timed.
Two rules change how to schedule it. The Xactware store exam page says you have 12 months to complete an exam after purchase, and the PDF says an exam may be taken once in that year, so buy it when you are ready rather than at the start of a course. Because the practical questions are answered from your own lab estimate, an early sketch error carries into several answers; recheck room dimensions before you open the timed part.

What does Xactimate certification cost? $120 an exam, $182 to $1,139 by route
The exam fee is fixed: per the Xactware store exam page, Levels 1, 2 and 3 are $120 each, or $360 for the set. The variable is preparation. Per the Xactware store workbook page, the Levels 1 and 2 workbook eBook is $62 and the Level 3 eBook is $25; per the Xactware Course Bundle page, 14 self-paced courses for 12 months cost $135.
| Provider and course | Format | Class time | Price | Per class hour |
|---|---|---|---|---|
| Verisk virtual: Level 1, 1 day | Live online | 8 hours | $329 | $41.12 |
| Verisk virtual: Level 1, 4 days | Live online | 12 hours | $499 | $41.58 |
| Verisk virtual: Level 2, 2 days | Live online | 12 hours | $382 | $31.83 |
| Verisk virtual: Level 2, 4 days | Live online | 12 hours | $499 | $41.58 |
| Verisk virtual: Levels 1 and 2, 3 days | Live online | 24 hours | $699 | $29.12 |
| Verisk virtual: Level 3, 2 days | Live online | 12 hours | $472 | $39.33 |
| Verisk virtual: Level 3, 4 days | Live online | 10 hours | $472 | $47.20 |
| Verisk virtual: certification prep | Live online | 2 hours | $136 | $68.00 |
| Verisk in person, Lehi, 15 to 17 Dec 2026 | Classroom | 3 days, 8:00 AM start, 3:00 PM finish | $658 | Not computed |
| Verisk in person, 4 sessions Jan to Feb 2027 | Classroom | 3 days, same hours | $899 | Not computed |
| Watermark, Levels 1 and 2 | Live online, 8 sessions to June 2027 | 24 scheduled hours, breaks included | $649 | $27.04 |
| Jon-Don, Levels 1 and 2 | Live stream, 25 and 26 June 2025 | 2 days | $750 | Not computed |
| Xactware Course Bundle | Self-paced, 12 months | 14 courses | $135 | Not computed |
Verisk’s own pricing does not reward the long format. Per the Verisk virtual class catalogue, Level 1 is $329 for 8 hours in one day but $499 for 12 hours over 4 days, and the 3-day Levels 1 and 2 class at $699 works out to the lowest Verisk rate per hour. Per the Verisk in-person class calendar, Verisk charges $658 for a December class in Lehi and $899 for the January and February 2027 dates, a $241 gap for the same 3-day course.
Third parties price near Verisk. Per the Watermark class listing on Zack Academy, its 3-day online class taught by an Xactimate Certified Trainer is $649 on all 8 listed dates, includes a discount code for the exams, and offers up to 14 IICRC CEC hours. The Jon-Don course page says its 2-day class prepares for both levels while the exams are bought separately. According to the Jon-Don registration page, the most recent price we could open was $750 for a June 2025 live stream. A Level 3 add-on on Verisk’s catalogue, 2-day class plus workbook plus exam, is $617 per the prices above.
How long does it take to learn Xactimate well enough to pass?
Measured in published class time, Level 1 takes 8 to 12 hours and Levels 1 and 2 together take 24, per the Verisk virtual class catalogue; Level 2 alone runs 12 hours and Level 3 runs 10 to 12. Verisk’s 2-hour certification prep session is the shortest product it sells, and the guide describes it as one-on-one with a Verisk certified trainer.
- New user, Level 1: a 1-day, 8-hour class or the self-paced Level One course in the $135 bundle per the store, then the exam, roughly 2 to 5 hours by the guide’s section estimates.
- New user, Levels 1 and 2: 24 class hours over 3 days at Verisk or Watermark, then 2 exams.
- Daily user aiming at Level 3: 10 to 12 class hours plus the Level 3 workbook, then an exam whose lab alone is estimated at 2 to 4 hours.
Class hours are the floor, not the forecast. The Verisk Xactimate training page says an annual Xactimate subscription includes unlimited self-paced training, over 100 hours of content, so subscribers can study without buying a class. How estimators build skill on live files, and which route suits which role, is the subject of our Xactimate training guide.
Do insurers, TPAs and employers actually require Xactimate certification?
No statute requires it; it is a vendor exam, and buyers decide whether to ask for it. Two public documents show the range. In 2018 the Boulder County RFP 6804-18 for a flood recovery estimator required experience with Xactimate, Homewyse or other acceptable estimating software, not a certificate. A July 2026 IEM damage assessor posting for CDBG-DR housing recovery listed active Xactimate certification without naming a level, beside a separate adjuster, building inspector or construction inspector licence.
That pattern, certification asked for but rarely by level, is what to expect from postings. When a programme manager or carrier names one, ask three questions: which level, whether it must be current within the 2-year validity, and whether Level 3 is needed to review other people’s estimates. Verisk’s trainer guide says certified users are listed in a user certification directory, so ask the programme whether it checks that directory or accepts a PDF certificate.
For contractors: who on the crew should hold it
The estimator who writes and defends the file to the adjuster gets the most from Level 2, because per the Verisk guide that exam covers depreciation options, coverage association and correcting inspection violations before an estimate is completed. Technicians need field credentials first: our WRT certification page covers the IICRC route, and what estimators and technicians earn sits in our restoration technician pay data, under operations.

What happens if you fail, and what happens after 2 years?
Verisk’s documents state 3 rules and leave 2 gaps. Per the Verisk certification guide, each level is a prerequisite for the next, an exam may be taken once for up to a year after purchase, and certification is valid for 2 years; the store repeats the 12 month and 2 year terms. Neither page we read describes a free retake after a fail or a renewal path at 2 years, so assume a second attempt means a second $120 purchase per the store price until Verisk confirms otherwise.
Ask Verisk training support 3 things before you buy: whether a failed attempt can be retaken on the same purchase, whether renewal at 2 years means sitting the current exam again, and whether an expired Level 1 blocks a Level 2 attempt. The software itself changes between versions, and the guide requires the most recent version for the lab; the product side is covered on our Xactimate software page.
Questions people actually ask
Is the Xactimate certification exam open book?
Verisk’s certification guide does not say either way. What it does say: the Sketch and Scope lab is untimed and you may exit and return before the questions start, while the 30 practical and 30 knowledge questions are timed. Ask Verisk support what references are allowed before your attempt, since an exam may be taken once per purchase.
Do you need your own Xactimate licence to take the exam?
Yes in practice. The Verisk guide says the lab uses your own locally installed Xactimate or the online version, and the most recent version is required. Students in Jon-Don’s 2-day class must also bring a laptop with Xactimate installed. Verisk does not publish the subscription price, so get a quote before booking a course.
Can you skip Level 1 and take Level 2 first?
Not under Verisk’s rules. Its certification guide says each level increases in difficulty and is a prerequisite for the next, so the order is Level 1, then Level 2, then Level 3. Experienced users can still move fast: per the Verisk catalogue, Level 1 and Level 2 can be prepared together in a 3-day, 24-hour class, then sat back to back at $120 each.
Does Xactimate certification count for IICRC continuing education?
The exam itself is not described as CEC credit, but some classes are. Watermark’s 3-day online Levels 1 and 2 course lists up to 14 IICRC CEC hours, with webcam on during class. Check the class listing for an IICRC event number and send the completion certificate to the IICRC yourself.
Where can you check if someone is Xactimate certified?
Verisk’s trainer guide says user and trainer certificate holders are listed in their respective certification directories. On 8 November 2026 the user directory address on Verisk’s site opened the general Xactimate training page instead, so ask the estimator for the certificate PDF with its date and level, and confirm the 2-year validity has not passed.
Sources
- Verisk Xactimate User Certification guide, Verisk Analytics, 2023: levels, exam sections, question counts, time estimates, pass mark, purchase window and validity. Retrieved 8 November 2026.
- Verisk trainer certification guide, Verisk Analytics, 2023: Level 3 requirement for trainers and directory listing. Retrieved 8 November 2026.
- Verisk Xactimate training page, Verisk: self-paced content included with a subscription. Retrieved 8 November 2026.
- Xactware store exam page, Xactware store workbook page and Xactware Course Bundle page, Xactware store, Verisk. Retrieved 8 November 2026.
- Verisk virtual class catalogue and Verisk in-person class calendar, Verisk registration calendars on LearningStream. Retrieved 8 November 2026.
- Watermark class listing on Zack Academy and the Watermark course calendar, Zack Academy. Retrieved 8 November 2026.
- Jon-Don course page and Jon-Don June 2025 registration page, Jon-Don. Retrieved 8 November 2026.
- Boulder County RFP 6804-18, Boulder County, Colorado, 2018. Retrieved 8 November 2026.
- IEM damage assessor posting, posted 21 July 2026 and marked expired. Retrieved 8 November 2026.
- Exam time sums, per-hour rates and route totals are arithmetic on the published values above, computed when this page was built. Our methodology sets out the standing rules.
Verisk sets exam and class prices and may change them without notice; the prices here date from 8 November 2026. Confirm the price, the retake rule and the renewal terms with Verisk before you buy. We have no commercial relationship with Verisk or any training provider named here.
